Technicolor COM2000 Manuale dell'Operatore Scaricare il pdf (Pagina 16)

COM120 (RF Distribution Panel) – This legacy device receives the incoming satellite feed via

your dish receiver and distributes the signals using a series of multiswitches. It then

sends these signals into the COM46 cards via the RF Inputs (labeled “Tuner 1” and

“Tuner 2”).

COM200 Chassis – This legacy device houses the COM24 or COM46 and FLX cards. All

video traffic is routed through the Gigabit Ethernet (GbE) port on the rear of the chassis

or to the QAM6. System management and control can be done by connecting a computer

to one of the management ports on the Ethernet Card or QAM6 card (i.e., front of the

chassis).

COM360 Chassis – This device houses the COM24 or COM46 and FLX cards. All video

traffic is routed through the two Gigabit Ethernet (GbE) ports on the front of the chassis

or to one of the two QAM6 slots. System management and control can be done by

connecting a computer to one of the management ports on the front panel or QAM6 cards

if installed.

Admin PC – This is an optional device and is nonessential to normal system operation. It is

recommended, however, as it can be useful in maintaining desired programming and

monitoring system function. This can be a desktop or laptop computer equipped with an

Ethernet port (or a USB port with Ethernet adapter), any of the recommended

applications listed in Section 5.1, and a web browser of your choice.

COM46 and COM46-FLX Cards – The bulk of this manual is dedicated to these cards. They

are the means by which the property will be able to receive the desired television

programming for their network and control the entire COM2000 system.

QAM6 Cards – An optional board that installs in the upper left side of a COM360 Chassis It

converts the COM46’s IP-packetized streams to QAM-modulated RF for distribution

throughout a property. The board provides up to 12 QAM modulator channels in addition

to a 10/100 Ethernet port. Each QAM channel can carry two to three HD or eight SD

video channels.

Edge QAM – In a typical installation, the COM46 cards will be configured to stream to a

QAM6 modulator. Alternatively the COM46 IP streams can feed an external edge QAM.

Property Distribution Network – This network, set up and maintained by the System Operator,

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 127 128

Nessun commento

Technicolor COM2000 Manuale dell'Operatore Pagina 16